MCQ Exam Test

Q1

A decrease in magnitude of current, voltage, a power of a signal in transmission between points, is known as

A Attenuation
B Amplitude
C Aloha
D Carrier

Q2

The fundamental requirements of private-to-public network interconnection methods which need to be provided in gateways is/are

A universal accessibility for private network Data Terminal Equipment (DTE)
B adequate cost control mechanisms for administration of the private networks
C to assign address to private network DTEs
D A and B both

Q3

Data link layer retransmits the damaged frames in most networks. If the probability of a frame's being damaged is p, what is the mean number of transmissions required to send a frame if acknowledgements are never lost.

A P I (K + 1)
B KIK (1 + F)
C 1/ (1 - F)
D K I (K - P)

Q4

Interconnected networks need communication processors such as switches, routers, hubs, and gateways. Select the best fit for answer:

A TCP/IP
B Protocol
C Open Systems
D Internetwork processor

Q5

You are working with a network that has the network ID 172.16.0.0, and you require 25 subnets for your company and an additional 30 for the company that will merge with you within a month. Each network will contain approximately 600 nodes. What subnet mask should you assign?

A 255.255.192.0
B 255.255.224.0
C 255.255.240.0
D 255.255.252.0

Q6

Which of the following characteristics is not true of NetBEUI?

A Highly-customizable
B Routable
C Little configuration required
D Fast for small networks to Self-tuning

Q7

Which of the following performs modulation and demodulation?

A fiber optic
B satellite
C coaxial cable
D modem

Q8

Which of the following is considered a broadband communications channel?

A coaxial cable
B fiber optic cable
C microwave circuits
D All of the above

Q9

The data communication support should include, but is not restricted to

A file transfer and transaction processing
B file and database access
C terminal support, electronic mail and voice grams.
D All of the above

Q10

The modern enterprise is interconnected internally and externally by the Internet, intranets, and other networks. Select the best fit for answer:

A Internetworked enterprise
B Information super highway
C Business applications of telecommunications
D Client/Server networks

Q11

The transport layer protocol is connectionless.

A NVT
B FTP
C TCP
D UDP

Q12

When using the loopback address, if TCP/IP is installed correctly, when should you receive a response?

A Immediately
B Only if the address fails
C After the next host comes online
D Within two minutes

Q13

Which of the following statement is correct?

A A spin stabilized satellite used solar cells mounted on a cylinder body that continuously rotates so that 40 a time and it also uses gyroscopic action of a spinning satellite to maintain its orientati
B A spin stabilized satellite uses solar panels whose cells are continually oriented toward the sun
C Satellite transponders use lower frequency reception of radiation from earth stations and higher frequency for transmission to earth stations.
D satellite transponders use a single frequency for reception and transmission from one point on earth to another

Q14

MAC is

A a method of determining which device has access to the transmission medium at any time
B a method access control technique or multiple-access transmission media
C a very common bit-oriented data link protocol issued to ISO.
D network access standard for connecting stations to a circuit-switched network

Q15

What is the name of the device that converts computer output into a form that can be transmitted over a telephone line?

A Teleport
B Modem
C Multiplexer
D Concentrator

Q16

Which of the following statement is correct?

A Satellite transponders contain a receiver and transmitter designed to relay microwave transmissions from one point on earth to another.
B Satellite transponders contain a device that echos the radiation without change from one point on earth to another.
C Satellite transponder contains devices that transform the message sent from one location on earth to a different code for transmission to another location.
D Satellite transponders use lower frequency reception of radiation from earth stations and higher frequency for transmission to earth stations

Q17

What is the default subnet mask for a class A network?

A 127.0.0.1
B 255.0.0.0
C 255.255.255.0.0
D 255.255.255.0

Q18

Data communications monitors available on the software market include

A ENVIRON/1
B TOTAL
C BPL
D Telenet

Q19

When UPC is used, the price of the item is located

A on the item
B on the item and on the shelf
C in computer storage
D on the shelf and in computer storage

Q20

The difference between a multiplexer and a statistical multiplexer is

A Statistical multiplexers need buffers while multiplexers do not need buffers
B Multiplexer use X.25 protocol, while statistical multiplexers use the Aloha protocol
C Multiplexers often waste the output link capacity while statistical multiplexers optimize its use
D Multiplexers use Time Division Multiplexing (TDM) while statistical multiplexers use Frequency Division Multiplexing (FDM)

Q21

Error control is needed at the transport layer because of potential errors occurring _____.

A from transmission line noise
B in routers
C from out-of-sequence delivery
D from packet losses.

Q22

Which of the following network access standard is used for connecting stations to a packet-switched network?

A X.3
B X.21
C X.25
D X.75

Q23

The term "remote job entry" relates to

A batch processing
B realtime processing
C transaction processing
D distributed processing

Q24

Communication between computers is almost always

A serial
B parallel
C series parallel
D direct

Q25

You are trying to decide which type of network you will use at your office, and you want the type that will provide communication and avoid collisions on the cable. Which of the following is the best choice?

A Token-Ring
B CSMA/CD
C Ethernet
D CSMA/CA

basic - Part 9

A decrease in magnitude of current, voltage, a power of a signal in transmission between points, is known as

The fundamental requirements of private-to-public network interconnection methods which need to be provided in gateways is/are

Data link layer retransmits the damaged frames in most networks. If the probability of a frame's being damaged is p, what is the mean number of transmissions required to send a frame if acknowledgements are never lost.

Interconnected networks need communication processors such as switches, routers, hubs, and gateways. Select the best fit for answer:

You are working with a network that has the network ID 172.16.0.0, and you require 25 subnets for your company and an additional 30 for the company that will merge with you within a month. Each network will contain approximately 600 nodes. What subnet mask should you assign?

Which of the following characteristics is not true of NetBEUI?

Which of the following performs modulation and demodulation?

Which of the following is considered a broadband communications channel?

The data communication support should include, but is not restricted to

The modern enterprise is interconnected internally and externally by the Internet, intranets, and other networks. Select the best fit for answer:

The transport layer protocol is connectionless.

When using the loopback address, if TCP/IP is installed correctly, when should you receive a response?

Which of the following statement is correct?

MAC is

What is the name of the device that converts computer output into a form that can be transmitted over a telephone line?

Which of the following statement is correct?

What is the default subnet mask for a class A network?

Data communications monitors available on the software market include

When UPC is used, the price of the item is located

The difference between a multiplexer and a statistical multiplexer is

Error control is needed at the transport layer because of potential errors occurring _____.

Which of the following network access standard is used for connecting stations to a packet-switched network?

The term "remote job entry" relates to

Communication between computers is almost always

You are trying to decide which type of network you will use at your office, and you want the type that will provide communication and avoid collisions on the cable. Which of the following is the best choice?

Report a problem